Micro- controller based full bore type electromagnetic flow transmitter specially used for various industrial applications. These flow transmitters accurately measure the flow rate of conductive liquids & slurries in closed pipes. Due to simple & rigid design the flow transmitter is an obstruction less & maintenance free instrument in place of conventional mechanical flow measuring device. The use of ʻ Pulsed DC ʼ technology offer highest ability & better measuring accuracy in the form of electrical signal 4 – 20 mA DC linearly proportional to volumetric flow.
The instrument is based on faraday’s law of electro-magnetic induction. A magnetic field is generated by the instrument in the flow tube. The fluid flowing through this magnetic field generates a voltage that is proportional to the flow velocity. Corresponding electrical output is provided with respect to measuring voltage.
| Media | Liquid ( Cleaner ) |
| Line Size | 15 NB TO 2000 NB |
| Accuracy | +/- 0.5% F.S |
| Process Temperature | 150 °C maximum |
| Type of Output | 4 to 20 mA DC, Isolated, Pulse, RS 485 |
| Calibration Range | As per requirement ( factory calibrated ) |
| Process Pressure | 10 kg/cm² maximum |
| Material of construction | Lining – Neoprene / Rubber / PTFE (Teflon) Flange- MS/SS Electrode-SS316,SS316L has alloy "C" platinum wetted parts-SS316, Body-MS |
| Power Supply | 1) 230 V AC, 50Hz +/- 10% 2) 24 V DC, External |
| Isolation | 1.4 KV between input, Output & Power Supply |
| Temperature Coefficient | +/- 0.1% per °C |
| Display | 4 digit, 0.3" Red LED for flow rate indication & 8 digit 0.3" Red LED for totalized flow indication. |
| Repeatability | +/- 1 % |
| Linearity | +/- 0.5 % |
| Excitation | Pulsed DC coil |
| Viscosity | 200 cp max |
| Dimensions | As per chart on rear |
| Process Connections | ASA B 16.5, Flanged |
| Mounting | In-Line (Horizontal or Vertical) |